DIY KIT for IN-14 Arduino Shield NCS314-8C Nixie Tubes Clock with Sockets Tubes Columns Arduino Optional. DIY KIT for Nixie Tubes Clock on IN-14+IN-19A Vintage xUSSRs Nixie Tubes.
KIT designed for Arduino Control board and Shield Tubes board. Designed for 8 IN-14 and 1 IN-19A Nixie Tubes, the most popular Vintage Nixie Tubes in the world. Nixie Tubes Clocks are one of the most beautiful and popular vintage Clocks in the world.Hundreds of thousands of Arduino boards are already fueling peoples creativity all over the world everyday. PCB, Design, Schematics, Case and Software made by GRA & AFCH. Set of all Electronics and mounting parts and components. IN-14 Nixie Tubes 8 pcs + IN-19 Nixie Tubes 1 pcs (optional , choose in selector). NE-2H Neon lamps 6 pcs. Columns for Dots 3 pcs (optional , choose in selector). Arduino Control Board UNO or MEGA (optional , choose in selector). Sensor, GPS Receiver, Remote (optional , choose in selector). Set of hex spacers and bolts. List of all Parts and Components on paper. User manual on vintage-style paper. Base listing contains bare PCB board NCS314-8C, Nixie Tubes and NE2H Neon lamps. If you have ANY questions, PLEASE ASK us. Shield supports IN-14 Nixie tubes 8 pcs + IN-19 Symbolic Nixie tubes -1pc. Date format: [DD:MM:YY]; 12/24 hour format: [HH:MM:SS]. Slot Machine Anti poisoning tubes saving function. Temperature measurement [Celsius or Fahrenheit]. GPS time synchronization requires a standard GPS receiver, NMEA protocol, 5 V power supply. Operation via IR remote control Remote control Sony RM-X151.
The maximum possible brightness of the tubes. Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it. Or you have option for a cyclic. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so you can easily change it (included songs: Mission Impossible, We Wish You).
Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LED backlight, tubes and sound.
You can check firmware version at the end. Unique detailed tube test our soft check each segment on every lamp. Distinguishable to see segment failure. Highly accurate RTC (Real Time Clock) DS3231SN with backup battery. Integrated high voltage power supply: 150 220V.
3 control buttons on board. 8 pcs RGB SMD LEDs. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (please check the manual). Test points for testing, adjusting and controlling low and high voltage circuits.
GPS receiver (only with Arduino Mega). IR remote controllers (In case of using Arduino UNO, they may conflict with Tone library). If you plan to use remote control. The using of Arduino MEGA works fluently.
Temperature sensor (DS18B20; 1-Wire protocol). Places for 3 column with 2 neon dots (digits separator).
Independent controls for upper and lower dots. Power supply connector dimensions: 5.5 x 2.1mm (center pin positive +). Nixie Tubes Shiled NCS314-8C PCB size: 296mm x 53.26mm.
(11.65 x 2.08 in). Easy to build beautiful clock we also offer. Easy to customize firmware under Your own needs, thanks to an open platform Arduino.
Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux. Complete Power On Self-Test (POST): LED backlight, tubes and sound. IN-14 Shield NCS314-8C Principal Electrical Scheme. IN-14 Arduino Shield NCS314-8C References. NCS314-8C Shield Board 2D Render Top side with dimensions.IN-14 Arduino Shield NCS314-8C Nixie Clock GRA & AFCH. The item "DIY KIT IN-14 Arduino Shield NCS314-8C Nixie Clock TUBES COLUMNS ARDUINO" is in sale since Monday, July 13, 2020.
This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios". The seller is "gra_and_afch_2" and is located in Dnepr. This item can be shipped worldwide.