Listing includes fully assembled boards, IN-14 Nixie tubes, MCU (microcontroller unit) ATmega328P flashed with Arduino Uno Bootloader and sketch (Firmware). This Nixie clock compatible with Arduino Uno, so it allows you to write your own unique programs on the Arduino platform, latest sources are always available on.
Github at the "NixeClock" repository. GRA AND AFCH Nixie Clocks KEY Features. Flexible platform, that support any Nixie Tubes (You can replace it to any our tubes board on Z573, IN-8, IN-8-2, Z5660, IN-18 or others, see our listings). Easy to assemble beautiful Nixie clock we offer housing.
It is easy to modify the clocks program for your tasks, due to the open Arduino platform. Fast upload new firmware via USB. Always newest firmware on GitHub. You will not have problems with drivers on Windows and MAC, we use only the genuine FT230 USB chip.
High PCB quality, Japanese aluminum capacitors (Nichicon, Panasonic). Tubes board can be easy cutted so that only 4 tubes left for [HH:MM].
The MCU board support a variety of tubes, such: ZM1042, Z522M, Z566M, Z5220M, ZM1040, Z5660M, B566M, LC-631, IN-14, IN-18, IN-12, IN-8, IN-7, IN-1, IN-2, IN-4, IN-8-2, IN-15, IN-16, IN-17 to use this tubes You need appropriate tubes PCB(s). This lot contains Ready-to-Use Nixie Clock with Nixie Tubes and power supply.1 pc assembled MCU board NCM107. 1 pc assembled Tubes boards NCT414 with Nixie tubes. (You can replace it to any our tubes board on IN-18, Z5560, IN-8, IN-12 or others, see our listings). Flashed MCU with Arduino bootloader and NixieClock sketch firmware.
6 pcs IN-14 Nixie tubes. 2 pcs IN-3 neon lamps as Dots.
Power supply 12V, 1A for any country (see selector on top of screen). User manual on vintage-style paper. This LOT contains Ready-to-Use IN-14 Nixie Tubes Clock! We offer housing for our IN-14 Nixie Clocks. If you have ANY questions.
Clock support many kinds of Nixie tubes (6 tubes [hh:mm:ss] format and 4 tubes [hh:mm]). Date format: DD:MM:YY. Unique RGB LEDs backlight with 16,7 million colors.Very easy to switch LEDS off/on or set desired color. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Software based on Arduino sketch, so MCU has Arduino bootloader within.
Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test. Keep time counting until power off. All setting stored to non-volatile memory. Integrated High Voltage Power supply 150 220V.ICSP connector for flashing Arduino Bootloader to blank MCU. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjust and control low and high voltage circuits. Pads for internal buttons and terminals for external buttons.
Pads for internal USB connector and terminals for external USB. Terminals for internal and external power connector. Terminals for external and internal buzzer. 2 dots column with separate controls upper and lower dots. Power consumption: 11-14V, 360mA (Recommended power source: voltage 12V, current 1-2A).MCU board NCM107 has world smallest size: 100mmx50mm. Tubes board NCT414 size: 200mmx50mm. Actual photos of Clock boards.
Tubes board NCT414 Top view. Tubes board NCT414 Bottom view. Example of assembled IN-14 Nixie Tubes Clock (without case). Example of assembled IN-14 Nixie Tubes clock with Columns.
After payments received and verified. The item "IN-14 Nixie Tubes Clock (Columns, Musical, USB) Arduino compatible" is in sale since Wednesday, March 1, 2017. This item is in the category "Consumer Electronics\Other Consumer Electronics". The seller is "gra_and_afch_2" and is located in Dnipropetrovsk.
This item can be shipped worldwide.