Note: The functions of reading the temperature, signals from the GPS and from the remote control are NOT IMPLEMENTED in the program supplied with the clock. Short video review can be found on YouTube by title.
"Raspberry Pi Adapter for Nixie Clock Shield NCS314/NCS312 (Linux and Arduino)". Nixie Clock Shield NCS314 compatible with Raspberry Pi Adapter, Arduino Uno and Mega, so it allows you to write your own unique programs on the Pi Adapter and Arduino platform.The latest sources files are always available on. The Arduino Nixie Tubes Shiled NCS314 allow You to make 6 digits Nixie Tubes Clock in Divergence Meter Mini style (by GRA & AFCH).
Or You can just display any 6 digits numerical strings on this IN-14 Nixie Tubes, made in xUSSR. Hundreds of thousands of Raspberry Pi/ Arduino Boards are already inspiring people creativity all over the world, everyday. PCB design, schematic, case and software made by GRA & AFCH.Kit compatible with Arduino Uno, so it allows you to write your own unique programs on the Raspberry Pi/ Arduino platform. Easy to customize firmware under Your own needs, thanks to an open platform Raspberry Pi/ Arduino.
The latest version of the firmware is always available on GitHub. Very high qualty of PCB. If you have ANY questions. 6 digits IN-14 Nixie tubes [hh:mm:ss].Time synchronization via the Internet. The maximum possible brightness of the tubes. Automatic update information on the tubes. Unique RGB LED backlight with 16,7 million colors. Integrated adjustable High Voltage Power supply: 150 220 V.
3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. Test points for testing, adjusting and controlling low and high voltage circuits. Highly Accurate RTC (Real Time Clock) DS3231SN with Backup battery. 3 buttons on board to control.IR reciver TSOP4836 for IR remote controllers (In case of using Arduino UNO, they may conflict with Tone library). If you plan to use remote controll, we strongly recommend the using of Arduino MEGA works fluently. Temperature sensor connector (DS18B20; 1-Wire protocol). 8 pcs of RGB SMD LEDs. Places for 2 column with 2 neon dots inside. Separate controls upper and lower dots. Power consumption: 11-14 VDC, 750 mA. Recommended: 12 VDC, not less than 1A. Power supply connector dimensions 5.5 x 2.1mm (center pin positive +). Nixie Tubes Clock Shield NCS314 IN-14 size: 200(L) x 90(H) x 53.34(W) mm (7.87 x 1.2 in). This listing does NOT contain the GPS, Remote and power supply. Nixie Tubes Shiled NCS314 Electrical Scheme. Nixie Clock Shield NCS314 v2. Arduino Shield to Raspberry Pi Adapter v1.0 10. See our video presentation of Nixie Clock on IN-14 tubes by GRA & AFCH. Nixie Tubes Clock Shiled for Arduino NCS314 photo gallery. Raspberry Pi to Arduino Shield adapter. After payments received and verified. The item "Raspberry Pi IN-14 Shield Nixie Tubes Clock (GPS, Temp sensor, Remote)" is in sale since Saturday, May 5, 2018. This item is in the category "Crafts\Other Crafts". The seller is "gra_and_afch_2" and is located in Dnipropetrovsk. This item can be shipped worldwide.