IN14 Glow Tube Clock Fluorescent Nixie Clock Display Time Date Temperature Assembled (with Tubes). Time display: hour, minute and second time display. Date display: year, month and day date display. Temperature display: display the current temperature.
High-precision clock: built-in high-precision clock chip with an annual error of less than 1 minute. Power-off memory: power-off or shutdown does not affect the clock timing. It is not necessary to reset the time after power-on or start-up.
Adopt high efficiency switching power supply, with low power consumption. Built-in CR1220 lithium battery, not affect the timing of the internal clock after powering off. Anti-poisoning function, which extends the service life of glow tube.
Button corresponding function: CH-: on/off NEXT: switch the bottom atmosphere light color EQ: enter the set time mode 1: hour, minute, second display mode 2: display year, month, day 3: display temperature 7: test glow tube Method of setting time: 1. Press EQ, the glow tube at the minute position starts to flash, enter the set time mode. You can change the value by pressing + or.
Set the next item by continuing to press EQ. The sequence is second-minute-hour-day-month-year, and finally press EQ to exit the setting mode.Method for setting timing switch: 1. Press the button 5, the glow tube starts to flash, firstly set the second, use + or- to change the value, press 5 again to set the minute, then press 5 again to set the hour; after setting is completed, press button 5 once again to exit the setting timing mode. Press the button 6, the glow tube starts to flash, firstly set the second, use + or- to change the value, press 6 again to set the minute, then press 6 again to set the hour; after setting is completed, press button 6 once again to exit the setting timing mode. The default is 00:00, which means turning off the timing on/off, so if you want to set 00:00 on/off, please set it to 23:59 or 00:01.
Set the anti-poisoning execution time interval: Press the button 4 to enter the anti-poisoning execution time interval setting, press + or- to set, after the setting is completed, press the button 2 to exit. Generally do not need to set. Usually it cost about 35USD-50USD. If you receive defective item, please kindly notify us within 14 days. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios".
The seller is "xspar" and is located in this country: CN. This item can be shipped worldwide.