IN-14 Nixie Tubes Clock Shield for Arduino UNO - NCS314-8C. The Arduino Nixie Tubes Shiled NCS314-8C allow You to make 8 digits Nixie Tubes Clock in Divergence Meter Mini style (by GRA & AFCH). Or You can just display any 8 digits strings on this IN-14 Nixie Tubes made in xUSSR. Hundreds of thousands of Arduino Boards are already inspiring peoples creativity, all over the world, everyday. PCB design, schematic, case and software made by GRA & AFCH.Nixie Clock Shield NCS314-8C compatible with Arduino Uno, so it allows you to write your own unique programs on the Arduino platform. The latest sources are always available on. Github at the "NixeTubesShieldNCS314" repository. This listing contains assembled board NCS314-8C, Nixie Tubes and IN-3 neon lamps.
Set of hex spacers and bolts. User manual on vintage-style paper. If you have ANY questions. Shield supports IN-14 Nixie tubes 8 pcs + IN-19 Symbolic Nixie tubes -1pc.Date format: [DD:MM:YY]; 12/24 hour format: [HH:MM:SS]. Slot Machine Anti poisoning tubes saving function. Temperature measurement [Celsius or Fahrenheit]. GPS time synchronization requires a standard GPS receiver, NMEA protocol, 5 V power supply. Operation via IR remote control Remote control Sony RM-X151. The maximum possible brightness of the tubes.
Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it.
Or you have option for a cyclic full spectrum color change! As alarm sound clock uses standard RTTTL (Nokia format) melodies, so you can easily change it (included songs: Mission Impossible, We Wish You). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LED backlight, tubes and sound.You can check firmware version at the end. Unique detailed tube test our soft check each segment on every lamp. Distinguishable to see segment failure. Highly accurate RTC (Real Time Clock) DS3231SN with backup battery.
Integrated high voltage power supply: 150 220V. 3 control buttons on board. 8 pcs RGB SMD LEDs. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (please check the manual).
Test points for testing, adjusting and controlling low and high voltage circuits. GPS receiver (only with Arduino Mega). IR remote controllers (In case of using Arduino UNO, they may conflict with Tone library).
If you plan to use remote control. The using of Arduino MEGA works fluently. Temperature sensor (DS18B20; 1-Wire protocol). Places for 3 column with 2 neon dots (digits separator).Independent controls for upper and lower dots. Recommended: 12 VDC, not less than 1A. Power supply connector dimensions: 5.5 x 2.1mm (center pin positive +). Nixie Tubes Shiled NCS314-8C PCB size: 296mm x 53.26mm. (11.65 x 2.08 in).
Easy to build beautiful clock we also offer. Easy to customize firmware under Your own needs, thanks to an open platform Arduino. Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux. Complete Power On Self-Test (POST): LED backlight, tubes and sound. See our video presentation of Nixie Clock on IN-14 tubes by GRA & AFCH.Shield Board NCS314-8 (Shield for NIXIE CLOCKS). Nixie Tubes Clock Shiled for Arduino NCS314-8C Photo Gallery.
After payments received and verified. The item "Nixie Tubes Clock Arduino Shield NCS314-8C for 8pcs IN-14 + IN19 Nixie Tubes" is in sale since Tuesday, August 21, 2018.
This item is in the category "Consumer Electronics\Other Consumer Electronics". The seller is "gra_and_afch_2" and is located in Dnipropetrovsk. This item can be shipped worldwide.