Nixie Tubes Clock

NoTubePlug-IN-14 6-tube NIXIE Clock PCB-NoEnclosure-FreeShipping-GPS option

NoTubePlug-IN-14 6-tube NIXIE Clock PCB-NoEnclosure-FreeShipping-GPS option

NoTubePlug-IN-14 6-tube NIXIE Clock PCB-NoEnclosure-FreeShipping-GPS option    NoTubePlug-IN-14 6-tube NIXIE Clock PCB-NoEnclosure-FreeShipping-GPS option

NEW-V2.2 Standard version, Pluggable-USB Powered IN-14 6-Tube Digit NIXIE Tube Clock PCB. Item Contains NO IN-14 NIXIE TUBEs+ NO Enclosure+ No GPS receiver. Item Contains Zero quantity of IN-14 NIXIE TUBEs. You need to prepare 6pcs IN-14 NIXIE tubes by yourself!!

We have updated the middle dots to [2pcs 4mm neon bulbs with glass tube outside], the middle dots can be installed via the socket [Pluggable], thus you can replace it by hand too. And Yes, NEW AC driver circuit for the middle dots, thus 2 segments inside the neon bulbs all can be light up together!!! This is the Pluggable version, NIXIE tubes can be installed via " SPECIAL THROUGH-HOLE FEMALE SOCKET PINS ", you can replace the IN-14 NIXIE tubes by yourself by hand. Add the Li-Battery drive-able function(Optional), thus it can work with the Li-poly battery only without the USB power if has this function installed; 2. 12Hour mode by using the one dot inside the tube; 3.

Have 2 Slot Machine Effcts , and you can turn on/off the Slot Machine by setting. Regular version of this Clock has no Li-Battery drive-able function!!! If wanna have this function, you need select the "Li Battery charger function". It contains a fully assembled and fully tested PCB, with a few middle neon bulbs+. You need to have the IN-14 NIXIE tubes and install its by yourself and prepare the Mini-USB wire by yourself.

If need GPS receiver, please check. USB Powered;Slim design;Module based structure. Low heat;Static driving;No Flashing. Tube Name: IN-14Made in the U. Tube Diameter: 18mm; Tube Height: 55mm(approx including glass nipple); Digit Height: 17mm; Digit Width: 10mm; Clock Supply: 5V DC via USB; Max Current: 550mA(900mA when in charging mode if has the Li function); PCB Size: 186mm45mm; PCB Color: Black.

5V USB powered, easy to be used. Can connect to your computer's USB plugs directly In some computers you may need to use the USB Cable that Have Two USB Connectors at the End. High efficiency HV circuit, you got almost no heat in 247 working condition. All SMT components, very thin PCB, only 8mm(Max) high with the Top & Bottom components; Static driving, No Flashing, High Brightness.

Support 12H or 24H display modes. Leading zero blanking is programmable. Display date in all format : YY.

DD; Can display week info too. Different Effects: Normal/ Fading/ Cross Fading/Flash /Loop /Random Loop/Scroll/Mix1/Mix2 for displaying time. All tubes' 09 segments tube can be lighted up; 7. High accuracy RTC inside, ±1.9ppm, usually ± 4.94 seconds per month. Simple setting by using 3 buttons only.

Three alarms with weekends ON/OFF support can be controlled individually. Three programmable Auto Power ON/OFF mode, can turn ON/OFF NIXIE tubes in any time you want. This function can save tubes life. Cr1220 RTC battery socket on board. Keeps RTC running during power outages.

Tri-colored RGB LED mounted under the each NIXIE tube. These LEDs can display different colors at the same time, with a lot of pre-defined auto color change effects. Store user settings in non-volatile memory. Please visit the url in the bottom side of the pictures to get the instructions, etc. 1PCS fully assembled clock PCB only NO IN-14 NIXIE tubes, NO enclosure, NO Mini-USB cable, NO power adapter.

(We will add neon bulbs and the small galss tubes as the middle dots as you can see in the picture;) It will have the. Prepare 1pcs CR1220 battery for the RTC and(or) 1PCS CR2025 battery for the remote by yourself! We may will change the Outlook/Circuit/PCB/Components without notification!

Use high quality tube(s) please. For the customers outside China. Please note that if you damage the circuit board, you need to repair it by yourself!! For 1PCS High Quality Brand 5V/1A USB Power Adapter: +5.99 USD; 2.

For the IR remote control function: +5.99 USD. For an extra acrylic case with all screws, bumpers, etc.

Please note that if you ordered the Li-battery function, you need to create the case by yourself because of. The acrylic case may not fit your battery.

For the Li-Battery charger function installed No. :+8.99USD; Note: We recommend using the Li-poly battery with at least 2000mAh, we have tried 7540150P (3.7V 3000mAh, 105mm40mm7.5mm, works fine). If need any extras, please note us, we will bill you later for any extras you need. Normally you will receive it in about two weeks. , depends on the destination location;For other far locations may need more days.

Is mailed to the destination country by CHINA POST and delivered via the local postal system. China Post Office tracking website. But sometimes, on those web sites, you can track 0 info or just the info that when the goods are transported inside CHINA. If you have not received the goods in 30 days, notice us, we will ask for the detail tracking information via the local post office. The item "NoTubePlug-IN-14 6-tube NIXIE Clock PCB-NoEnclosure-FreeShipping-GPS option" is in sale since Saturday, August 20, 2016. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios". The seller is "vfdclock" and is located in ZheJiang Prov.. This item can be shipped worldwide.
  1. Model: IN-14 6-Tube NIXIE TUBE ERA Pluggable
  2. MPN: Does not apply
  3. Country/Region of Manufacture: Unknown
  4. Brand: Unbranded/Generic
  5. Display Type: NIXIE TUBE
  6. Type: IN-14 6-IN-14 6-Tube Tube NIXIE TUBE ERA Pluggable
  7. Features: nixie clock

NoTubePlug-IN-14 6-tube NIXIE Clock PCB-NoEnclosure-FreeShipping-GPS option    NoTubePlug-IN-14 6-tube NIXIE Clock PCB-NoEnclosure-FreeShipping-GPS option