DIY KIT IN-14 Arduino Shield NCS314 v2.2 Nixie Tubes Clock with Columns Sockets Arduino UNO/MEGA and Power Supply. DIY KIT for IN-14 Shield Nixie Clock with Columns. Developed for 6 IN-14 xUSSR Nixie Tubes with Sockets. IN-14 Tubes are the most popular mass-produced Nixie Tubes. Nixie Clocks are one of the most beautiful and popular Vintage Clocks.Clocks features Startup Tune, RGB backlight, USB port for updates. DIY KIT developed for Tubes Shield Board and Control Arduino Board. Options include Tubes, Columns, Sockets, Arduino, Power Supply. Sensor, GPS Receiver and Remote.
DIY KIT is made for Arduino UNO and MEGA 2560 Control Boards. It allows you to write your own uniqe programs for the Arduino platform. All the latest Source codes are always available on our GitHub channel. PCB, Design, Schematics, Case and Software made by GRA & AFCH. Tubes Shield (NCS314) Bare PCB.Set of Electronic Parts and Components for Shield (NCS314) Board. Set of Screws and Spacers for Shield and Arduino Boards. NE2H Neon Bulbs for Dot - 2 pcs (+one spare). IN-14 Nixie Tubes - 6 pcs (optional, choose in selector). Glass Columns (with four Dots).
Socket pins (Set for 6 Tubes). Control Arduino Board (UNO or MEGA 2560). Principal Electrical Scheme (NCS314) (on paper). BOM List for Shield (NCS314) Board. User Manual for Arduino Shield Clock on a Vintage style paper.
BARE PCB and full Set of Electronic and other Parts. We offer optional Parts and Accessories for Arduino Nixie Clocks.
If you have ANY questions. Easy to build beautiful clock - we also offer. Easy to customize firmware under Your own needs, thanks to an open platform - Arduino.
The latest version of the firmware is always available on GitHub. No need for additional drivers - we are use only Genuine USB to serial converters. Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux. Very high quality product, made to lasts. Complete Power On Self-Test (POST): LED backlight, tubes and sound.
Shield supports IN-14 Nixie tubes - 6 pcs. Date format: [DD:MM:SS]; 12/24 hour format: [HH:MM:SS]. Slot Machine Anti poisoning - tubes saving function. Temperature measurement [Celsius or Fahrenheit].
GPS time synchronization requires a standard GPS receiver, NMEA protocol, 5 V power supply. Operation via IR remote control Remote control Sony RM-X151. The maximum possible brightness of the tubes. Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it.Or you have option for a cyclic full spectrum color change! Switching on/off LED backlight in the matter of seconds. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: Mission Impossible, We Wish You. Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end. Unique detailed tube test - our soft check each segment on every lamp. Distinguishable to see segment failure. Highly Accurate RTC (Real Time Clock) DS3231SN with backup battery. Integrated high voltage power supply: 150 - 220V.
3 control buttons on board. 8 pcs RGB SMD LEDs.3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits. GPS receiver (only with Arduino Mega). IR remote controllers (In case of using Arduino UNO, they may conflict with "Tone" library). If you plan to use remote control. The using of Arduino MEGA - works fluently.
Temperature sensor (DS18B20; 1-Wire protocol). Places for 2 Columns with 2 Neon Dots (digits separator). Independent controls for upper and lower dots. Recommended: 12 VDC, not less than 1A.
Power supply connector dimensions: 5.5 x 2.1mm (center pin positive "+"). Nixie Tubes Shield NCS314 PCB size: 200 mm x 53.34 mm. (7.87 x 1.2 in). IN-14 Shield NCS314 v2.2 Principal Electrical Scheme. Board dimensions in 2D and 3D.IN-14 NCS314 v2.2 Arduino Shield References. NCS314 v2.2 Shield Board Top Bare PCB. NCS314 v2.2 Shield Board Bottom Bare PCB. NCS314 v2.2 Shield Board Top Populated PCB. NCS314 Shield Board Bottom Populated PCB. DIY KIT for NCS314 v 2.2 Shield. IN-14 Arduino Shield Nixie Tubes Clock by GRA & AFCH. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios". The seller is "gra_and_afch_2" and is located in this country: UA. This item can be shipped worldwide.