All the latest Source codes are always available on our GitHub channel. PCB, Design, Schematics, Case and Software made by GRA & AFCH.
DIY KIT for IN-14 Arduino Shield NCS314-6 Nixie Tubes Clock with Columns and Sockets in Acrylic. This is example of assembled IN-14 Shield Clock in Acrylic Case. Listing contains all parts and components to build IN-14 Arduino Shield Clock in Acrylic.Parts include Tubes, Columns, Acrylic Case and Power Supply. Tubes Shield NCS314-6 Board Bare PCB. Set of Electronic Parts and Components for Shield NCS314-6 Tubes Board. Set of Hex Spacers and Screws for Shield NCS314-6 and Arduino Boards. Set of Socket Pins for 6 IN-14 Nixie Tubes. NE2H Neon Bulbs for Dots 3 pcs (2 Neons for Dots and one spare). IN-14 Nixie Tubes 6 pcs Set. Columns with Dots 2 pcs. Power Supply (12V, 1A) (US, EU, UK, AU). Clear Acrylic Case for IN-14 Shield Nixie Clock. Principal Electrical Scheme for Shield NCS314-6 Tubes Board. BOM List for Shield NCS314-6 Tubes Board. User Manual on vintage style paper. This Listing contain all needed parts for Shield Nixie Clock, however you can find optional parts as well by links below. And upload software into your Arduino. If you have ANY questions.
Easy to build beautiful clock we offer case. Easy to customize firmware under Your own needs, thanks to an open platform Arduino. The latest version of the firmware is always available on GitHub. No need for additional drivers we are use only Genuine USB to serial converters.
Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux. Shield support 6 IN-14 Nixie tubes [hh:mm:ss]. Temperature display (DS18B20) [Celsius or Fahrenheit]. GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included).Operation via IR remote control (Remote control Sony RM-X151, not included). No need refresh or update information on the tubes. The maximum possible brightness of the tubes. Date format: DD:MM:YY. Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it.
(included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LEDs test, tubes test, sound test. Integrated High Voltage Power supply: 150 220V.
3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits. RTC (Real Time Clock) High precision time chip DS3231 with Backup battery. Acquiring time via external GPS module (only with Arduino Mega).
3 buttons on board to control. Potenciometer to adjust High Voltage. IR reciver TSOP4836 for IR remote controllers (may conflict with Tone library). 8 pcs of RGB SMD LEDs.
Places for 2 column with 2 neon dots inside. Separate controls upper and lower dots. Recommended: 12V, 1-2A (center pin positive +). Nixie Tubes Shiled NCS314 PCB size: 200mm x 53.34mm.
(7.87 x 1.2 in). Arduino Nixie Tubes Clock Shield NCS314 Top View. Arduino Nixie Tubes Clock Shield NCS314 bottom View. Boards Dimensions in 2D and 3D.
Acrylic Case for IN-14 Arduino Shield Nixie Clock. Nixie Tubes Clock Shield IN-14 Arduino NCS314 in Acrylic.This is example of assembled IN-14 Arduino Shield NCS314 in Acrylic. If you have ANY questions, PLEASE ASK us. The item "DIY KIT IN-14 Arduino Shield NCS314 Nixie Tubes Clock with Acrylic WITH TUBES" is in sale since Friday, February 19, 2021. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios".
The seller is "gra_and_afch_2" and is located in Dnipropetrovsk. This item can be shipped worldwide.