DIY KIY IN-14 Nixie Tubes Clock Shield for Arduino UNO or MEGA - NCS314. The Arduino Nixie Tubes Shield NCS314 allow you to make 6 digits Nixie Tubes Clock in "Divergence Meter Mini" style (by GRA & AFCH). Or you can just display any 6 digits strings on this IN-14 Nixie Tubes made in xUSSR. Hundreds of thousands of Arduino Boards are already fueling people's creativity all over the world, everyday.PCB design, schematic, housing and software made by GRA & AFCH. Nixie Clock Shield NCS314 compatible with Arduino UNO/Genuino & Arduino MEGA. Sso it allows you to write your own unique programs on the Arduino platform. The latest sources are always available on. Github at the NixeTubesShieldNCS314 repository. DIY KIT IN-14 Arduino Shield NCS314 v2.2 Nixie Tubes Clock with Columns Sockets Arduino UNO/MEGA and Power Supply. DIY KIT for IN-14 Shield Nixie Clock with Columns. Developed for 6 IN-14 xUSSR Nixie Tubes with Sockets. IN-14 Tubes are the most popular mass-produced Nixie Tubes. Nixie Clocks are one of the most beautiful and popular Vintage Clocks.
Clocks features Startup Tune, RGB backlight, USB port for updates. DIY KIT developed for Tubes Shield Board and Control Arduino Board.
Options include Tubes, Columns, Sockets, Arduino, Power Supply. Sensor, GPS Receiver and Remote. DIY KIT is made for Arduino UNO and MEGA 2560 Control Boards. It allows you to write your own unique programs for the Arduino platform. All the latest Source codes are always available on our GitHub channel.
PCB, Design, Schematics, Case and Software made by GRA & AFCH. Tubes Shield (NCS314) Bare PCB.Set of Electronic Parts and Components for Shield (NCS314) Board. Set of Screws and Spacers for Shield and Arduino Boards. NE2H Neon Bulbs for Dot - 2 pcs (+one spare). IN-14 Nixie Tubes - 6 pcs (included with the KIT). Principal Electrical Scheme (NCS314) (on paper). BOM List for Shield (NCS314) Board. User Manual for Arduino Shield Clock on a Vintage style paper. Only BARE PCB, Nixie Tubes and full set of electronics parts. Without Arduino, columns and power supply. This is example of assembled board NCS314 with full complectation. This listing contains bare board to make.
Shield NCS314 with soldered Nixie Tubes IN-14 and IN-3 neon lamps. Bare NCS314 board - 1pc. IN-14 Nixie Tubes - 6pcs. IN-3 Neon lamps - 2pcs. Set of hex spacers and screws.
User manual on vintage-style paper. This listing does NOT contain the Arduino Board and Power Supply. Flashed Arduino Mega here: (Mega). And upload software into your Arduino. If you have ANY questions, (PLEASE ASK us).
Easy to build beautiful clock - we offer housing. Easy to customize firmware under Your own needs, thanks to an open platform - Arduino. The latest version of the firmware always available on GitHub. No need to download drivers - we are use only Genuine USB to serial converters.Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux. Very high quality of Printed Circuit Boards. Shiled support 6 IN-14 Nixie tubes [hh:mm:ss].
Temperature display (DS18B20) [Celsius or Fahrenheit]. GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included). Operation via IR remote control (Remote control Sony RM-X151, not included). No need refresh or update information on the tubes.
The maximum possible brightness of the tubes. Date format: DD:MM:YY. Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on.As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE.
Power On Self-Test (POST): LEDs test, tubes test, sound test. Integrated High Voltage Power supply: 150 - 220V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors.
It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits. RTC (Real Time Clock) High precision time chip DS3231 with Backup battery. Acquiring time via external GPS module (only with Arduino Mega). 3 buttons on board to control.Potenciometer to adjust High Voltage. IR reciver TSOP4836 for IR remote controllers (may conflict with "Tone" library). 8 pcs of RGB SMD LEDs. Places for 2 column with 2 neon dots inside.
Separate controls upper and lower dots. Recommended: 12V, 1-2A (center pin positive +).
Nixie Tubes Shield NCS314 PCB size: 200mm x 53.34mm. (7.87 x 1.2 in). Arduino Nixie Tubes Clock Shield NCS314 Top View.Arduino Nixie Tubes Clock Shield NCS314 bottom View. Boards Dimensions in 2D and 3D. IN-14 Nixie Tubes Clock Shield NCS314. With Arduino by GRA & AFCH. This is example of assembled board NCS314 - complete Set. The base listing contains only BARE PCB and full set of electronics parts (Arduino, Columns and Power Supply are EXCLUDED from set). If you have ANY questions, PLEASE ASK us.
This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios". The seller is "gra_and_afch" and is located in this country: UA.