IN-12 Arduino Shield Nixie Tubes Clock NCS312 Shield with Sockets on Acrylic Stand. Shield Nixie Clock on a Clear Acrylic Stand. Designed for 6 IN-12 (A\B) xUSSR Nixie Tubes with Sockets.IN-12 Tubes are one of the most popular mass-produced Nixie Tubes. Nixie Clocks are one of the most beautiful and popular Vintage Clocks. Clock features Startup Tune, RGB backlight, USB port for updates. Shield features Sockets and options include Tubes, Power Supply. Sensor, GPS Receiver and Remote.
Shield Clock is designed for Arduino UNO and MEGA 2560 Boards. It allows you to write your own uniqe programs for the Arduino platform. All the latest Source codes are always available on our GitHub channel. PCB, Design, Schematics, Case and Software made by GRA & AFCH. Shield Tubes Clock with Sockets on Acrylic Stand (NCS312 Shield).
IN-12 Nixie Tubes - 6 pcs Set (optional, choose in selector). Arduino Control Board - (UNO or MEGA 2560) (optional, choose in selector). GPS Receiver (GA-6) (optional, choose in selector). IR Remote (optional, choose in selector). Power Supply (12V, 1A) (US, EU, UK, AU) (optional AC plug, choose in selector).
User Manual on Vintage style paper. Shield Board features Sockets for Nixie Tubes. Arduino Control Board is optional for the Clock.
Power Supply is optional for the Clock. Clear Acrylic Stand included with the Clock. Listing contains Assembled Shield NCS312 with IN-12 Nixie Tubes and NE2H Neon Bulbs. Use links below to upload software into your Arduino.A special Socket for each pin of IN-12 - easy to change Tubes. Easy to customize firmware under Your own needs, thanks to an open platform - Arduino. The latest version of the firmware always available on GitHub. No need to download drivers - we are use only Genuine USB to serial converters (FTDI FT230). Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux. Very high qualty of Printed Circuit Boards. If you have ANY questions, (PLEASE ASK us). Shiled support 6 IN-12 Nixie tubes [hh:mm:ss]. Temperature display (DS18B20) [Celsius or Fahrenheit].
GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included). Operation via IR remote control (Remote control Sony RM-X151, not included). No need refresh or update information on the tubes. The maximum possible brightness of the tubes. Date format: DD:MM:YY.
Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it.
(included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LEDs test, tubes test, sound test. Integrated High Voltage Power supply: 150 - 220V.
3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual).
Test points for testing, adjusting and controlling low and high voltage circuits. RTC (Real Time Clock) High precision time chip DS3231 with Backup battery. Acquiring time via external GPS module (only with Arduino Mega). 3 buttons on board to control. Potenciometer to adjust High Voltage.
IR reciver TSOP4836 for IR remote controllers (may conflict with "Tone" library). 6 pcs of RGB SMD LEDs. Places for 2 column with 2 neon dots inside. Separate controls upper and lower dots. Recommended: 12V, 1-2A (center pin positive +).Nixie Tubes Shiled NCS312 PCB size: 180 x 53.34 x 1.6 mm. (7.87 x 1.2 x 0.062 inch).
IN-12 Arduino Shield Nixie Tubes Clock on Acrylic Stand. Boards dimensions in 2D and 3D. If you have ANY questions, PLEASE ASK us.This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios". The seller is "gra_and_afch_2" and is located in this country: UA. This item can be shipped worldwide.