Power Supply is included with the Clock. If you have ANY questions.
Clock uses rarest xUSSR nixie tubes IN-14 - 4pcs. Date format: [DD:MM]; 12/24 hour format: [HH:MM].The maximum possible brightness of the tubes. Slot Machine Anti poisoning - tubes saving function. Temperature measurement [Celsius or Fahrenheit]. GPS time synchronization requires a standard GPS receiver, NMEA protocol, 5 V power supply. IR remote controls Remote control model Sony RM-X151/RM-X153. IR protocol SIRC or any protocol if you able to implement it. Automatic update information on the tubes. Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it.
Or you have option for a cyclic full spectrum color change! Switching on/off LED backlight in the matter of seconds.
As alarm sound clock uses standard RTTTL (Nokia format) melodies, so you can easily change it (included songs: Mission Impossible, We Wish You. Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end.
Unique detailed tube test - our soft check each segment on every lamp. Distinguishable to see segment failure. Highly Accurate RTC (Real Time Clock) DS3231SN with backup battery. Integrated adjustable High Voltage Power supply: 150 - 220 V.3 control buttons on board. 8 pcs RGB SMD LEDs. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (please check the manual).
High quality PCB and components. Test points for testing, adjusting and controlling low and high voltage circuits. L external GPS receiver (only with Arduino Mega). IR remote controllers (In case of using Arduino UNO, they may conflict with "Tone" library).
If you plan to use remote controll. The using of Arduino MEGA - works fluently.
Temperature sensor (DS18B20; 1-Wire protocol). Places for 2 column with 2 neon dots (digits separator). Independent controls for upper and lower dots. Power consumption: 11-14 VDC, 750 mA. Recommended: 12 VDC, not less than 1A.Power supply connector dimensions 5.5 x 2.1mm (center pin positive "+"). IN-14 Tubes Clock dimensions: 180(L) x 90(H) x 78(W) mm. Easy to build beautiful clock - we also offer. Easy to customize firmware under Your own needs, thanks to an open platform - Arduino. Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux.
Complete Power On Self-Test (POST): LED backlight, tubes and sound. IN-14 Nixie Clock Shield NCS314-4 in Acrylic Case. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios". The seller is "gra_and_afch_2" and is located in this country: UA.
This item can be shipped worldwide.