IN-8-2 Nixie Tubes Clock Tubes, Columns, Power Supply 12/24H Slot Machine

IN-8-2 Nixie Tubes Clock with Columns Tubes Columns Temp. Nixie Tubes Clock with Columns. Designed for 6 IN-8-2 Vintage xUSSR Nixie Tubes. IN-8-2 Tubes are one of the most popular mass-produced Nixie Tubes.

Nixie Clocks are one of the most beautiful and popular Vintage Clocks. Clock features Startup Tune, RGB backlight, USB port for updates. Nixie Tubes Clock options include Tubes, Columns, Power Supply. Plugable Accessories include compact external Temperature sensor.

Nixie Clock is fully compatible with Arduino platform program codes. It allows you to write your own uniqe programs for the Arduino platform.

All the latest Source codes are always available on our GitHub channel. PCB, Design, Schematics, Case and Software made by GRA & AFCH. Nixie Tubes Clock (NCT482+NCM109 Boards). IN-8-2 Nixie Tubes - 6 pcs Set (optional, choose in selector). Columns with Dots - 2 pcs (optional, choose in selector).

Temperature sensor (DS18B20) (optional, external with jack 3.5 mm). Power Supply (12V, 1A) (US, EU, UK, AU) (optional AC plug, choose in selector).

User Manual on Vintage style paper. Columns with separating Dots are optional for the Clock. Temperature sensor with jack 3.5 mm is optional for the Clock. Power Supply is optional for the Clock. Nixie Clock support usage of basic Accessory - Temperature sensor. Listing contains assembled boards, flashed microcontroller (ATmega328P). The MCU board support a variety of tubes, such: ZM1042, Z522M, Z566M, Z5220M, ZM1040, Z5660M, B566M, LC-631, IN-14, IN-18, IN-12, IN-8, IN-7, IN-1, IN-2, IN-4, IN-8-2, IN-15, IN-16, IN-17 to use this tubes You need appropriate tubes PCB(s). If you have ANY questions.

All our Nixie Tubes Clocks are using HV513WG chips, it provides higher brightness in multiplexing mode in comparison with HV5812 chip and greater reliability compared to legacy K155ID1. We offer flexible Tubes Boards platform, that support many Nixie Tubes (out Tubes Boards designed for IN-4, IN-8, IN-8-2, IN-12, IN-14, IN-16, IN-17, IN-18 and Z573, Z5660M, ZM1042, Z568M Nixie Tubes). It is easy to build a beautiful Nixie Tubes Clock with our Boards, we also offer Acrylic, Wooden and Stone Cases for our Clocks. Fast uploading pf the Firmware via USB to the Control Board. All the latest version of the Firmwares to all our Nixie Clocks are always available on our GitHub channel.

No need for additional drivers, we are using only genuine USB-to-serial converters (FTDI), drivers for them are pre-installed in all popular OSes: Windows, MacOS, Linux. It is easy to modify the Nixie Clock's Firmware functions for your tasks due to the open Arduino platform. We use High Quality PCBs and Components, also we use Japanese aluminum capacitors only for our Boards (Nichicon, Panasonic).

Tubes Board is easy to modify by cutting if you want to build 4 Tubes Clock [HH:MM] from 6 Tubes Clock. Our Nixie Boards use Power On Self-Test (POST): LED backlight flashing, Tubes flashing and Start up Tune. Our Boards use, Firmware version can be seen at the end of the POST test. Our Tubes Boards use Unique detailed Tube test - our soft test checks each Tubes segment on every Tube so it distinguishable to see segments failures.

Clock support many kinds of Nixie tubes (6 tubes [hh:mm:ss] format and 4 tubes [hh:mm]). Date format: DD:MM:YY. Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it.

(included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Software based on Arduino sketch, so MCU has Arduino bootloader within. Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test. Integrated High Voltage Power supply 150 - 220V.

ICSP connector for flashing Arduino Bootloader to blank MCU. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjust and control low and high voltage circuits. Pads for internal buttons and terminals for external buttons.

Pads for internal USB connector and terminals for external USB. Terminals for internal and external power connector. Terminals for external and internal buzzer. 2 dots column with separate controls upper and lower dots. Power consumption: 11-14V, 360mA (Recommended power source: voltage 12V, current 1-2A).

MCU board NCM107 has world smallest size: 100mmx50mm. Tubes board NCT482 size: 200mmx50mm. Tubes board NCT482 in 3D.

IN-8-2 Nixie Tubes Clock with columns. If you have ANY questions, PLEASE ASK us. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios". The seller is "gra_and_afch_2" and is located in this country: UA. This item can be shipped worldwide.

Columns: YES
Tubes: NO
Power supply: US
Temp sensor: YES
Shape: Irregular
Model: IN-8-2 Nixie Clock
Character: IN-8-2 Nixie Tubes Clock
Modified Item: No
Country/Region of Manufacture: Ukraine
Department: Adults
Style: Vintage/Retro
Custom Bundle: No
Item Height: 78
Item Width: 50
Product Line: Nixie Clock
Smart Home Compatibility: no
Material: Glass
Theme: Art
Original/Reproduction: Original
Movement: Quartz (Battery Powered)
Power Source: Electrical
Type: Electronic Alarm Clock
Features: 12 Hour Display, 24 Hour Display, 3.5mm Auxiliary Input, Alarm, Battery Backup, Color Changing, Countdown Timer, Date/Calendar, Day/Date Display, Dual Alarm, Extra-Loud Alarm, Humidity Display, Illuminated Dial, Large Display, LCD Display, LED Display, Night Light, Temperature Display, Timer, Wake-Up Light, White Noise
Smart Home Protocol: no
Color: White
Year Manufactured: 2020
Finish: Stainless
Item Length: 200
Frame Material: Brass
Room: Bathroom, Bedroom, Dining Room, Garage, Hallway, Home Office/Study, Kitchen, Laundry/Utility Room, Living Room, Playroom, Porch, Sunroom
Character Family: Nixie Clock
Engraved: No
Brand: GRA & AFCH
Number Type: Arabic Numerals
Era: 21st Century (2000-now)
Display Type: Nixie Tube