NIXIE TUBE IN-12 CLOCK KIT. This set is very easy to assemble and uses a minimum of parts. Thanks to the video instructions, even a person who first picks up a soldering iron can solder it. The listing contains PCB board, full set of electronics parts, wooden parts, power supply, IN-12 tubes and Arduino NANO. You will receive programmed Arduino NANO.
Clock displays time in HH:MM format (24 hours). Numbers turning modes (No effect, smooth transition through fading, number rewind, cathode rewind, "Train", "Rubber").
Night mode from 23:00 till 7:00 (the light of the lamps is much softer). The clock runs correctly even after a power outage.Also you can enable / disable "glitches mode" which looks stylish and vintage. Arduino NANO - 1 pc. PCB board - 2 pcs 3.
Mini RTC DS3231 - 1 pc. PBS-40 and PLS-40 - 1 pc 5. Capacitor 350 V 4,7 uF - 1 pc. Resistor 470 kOhm - 1 pc 7.Inductor 220 uH 240 mA - 2 pcs (1 spare pc). Diode HER106 - 1 pc 9. Transistor IRF840PBF - 1 pc. Optocoupler TLP627(F) DIP-4 - 7 pcs (2 spare pcs) 11.
Decoder K155ID1 - 1 pc. Light-emitting diode - 4 blue pcs. Neon dot - 1 pc.Resistor 100 Ohm 0,25 W - 4 pcs (1 spare pc). Resistor 200 kOhm 0,25 W - 2 pcs (1 spare pc) 16.
Resistor 470 Ohm 0,25 W - 2 pcs (1 spare pc). Resistor 10 kOhm 0,25 W - 2 pcs (1 spare pc) 18.IN-12 tubes - 4 pcs. Power supply - 1 pc. Electrolytic capacitor 10 V 470 uF - 1 pc. Wooden enclosure parts - 1 pc. Our working hours: 8:00 - 18:00 (Eastern Standard Time) seven days a week. If you want to ask a question, please message us. We will reply within 15 minutes 8:00 - 18:00 (Eastern Standard Time) seven days a week. We check all items before sending out.
All products are brand new, never been used or refurbished. The item "Nixie Clock Kit IN-12 (With tubes) and Wooden Enclosure" is in sale since Thursday, November 26, 2020. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios". The seller is "poltava_workshop" and is located in Poltava. This item can be shipped worldwide.