DIY KIT IN-14 Aruino Shield Nixie Tubes Clock Shield for Arduino UNO/ MEGA NCS314 HW v2.2. WITHOUT Tubes Columns Arduino Power Supply. DIY KIT for IN-14 Shield Nixie Clock with Columns.Developed for 6 IN-14 xUSSR Nixie Tubes. IN-14 Tubes are one of the most popular mass-produced Nixie Tubes. Nixie Clocks are one of the most beautiful and popular Vintage Clocks. Clock features Startup Tune, RGB backlight, USB port for updates. DIY KIT developed for Tubes Shield Board and Control Arduino Board.
Options include Tubes, Columns, Arduino and Power Supply. DIY KIT is made for Arduino UNO and MEGA 2560 Control Boards.It allows you to write your own uniqe programs for the Arduino platform. All the latest Source codes are always available on our GitHub channel.
PCB, Design, Schematics, Case and Software made by GRA & AFCH. This is example of assembled board NCS314 with full complectation.Tubes Shield (NCS314 v2.2) Bare PCB. NE-2H Neon Bulbs for Dots - 4 pcs. Set of Electronic Parts and Components for Shield (NCS314 v2.2) Board. Set of Screws and Spacers for Shield and Arduino Boards. Principal Electrical Scheme on paper.
BOM List for Shield (NCS314 v2.2) Board. User Manual on a Vintage style paper. Only BARE PCB and full set of electronics parts No Tubes, no Columns, no Arduino, no Power Supply. Shield NCS314 with soldered Nixie Tubes IN-14 and IN-3 neon lamps. This listing does NOT contain the Arduino board and power supply.And upload software into your arduino. Easy to build beautiful clock - we offer housing. Easy to customize firmware under Your own needs, thanks to an open platform - Arduino. The latest version of the firmware always available on GitHub.
No need to download drivers - we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux. Very high qualty of Printed Circuit Boards.
If you have ANY questions, (PLEASE ASK us). Shiled support 6 IN-14 Nixie tubes [hh:mm:ss].Temperature display (DS18B20) [Celsius or Fahrenheit]. GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included). Operation via IR remote control (Remote control Sony RM-X151, not included). No need refresh or update information on the tubes. The maximum possible brightness of the tubes. Date format: DD:MM:YY. Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it.
(included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LEDs test, tubes test, sound test.Integrated High Voltage Power supply: 150 - 220V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits. RTC (Real Time Clock) High precision time chip DS3231 with Backup battery. Acquiring time via external GPS module (only with Arduino Mega). 3 buttons on board to control. Potenciometer to adjust High Voltage. IR reciver TSOP4836 for IR remote controllers (may conflict with "Tone" library). 8 pcs of RGB SMD LEDs. Places for 2 column with 2 neon dots inside.
Separate controls upper and lower dots. Recommended: 12V, 1-2A (center pin positive +). Nixie Tubes Shiled NCS314 PCB size: 200mm x 53.34mm.
(7.87 x 1.2 in). Arduino Nixie Tubes Clock Shield NCS314 Top View. Arduino Nixie Tubes Clock Shield NCS314 bottom View. Boards Dimensions in 2D and 3D.IN-14 Arduino Shield NCS314 v2.2 Electrical Scheme. Nixie Tubes Clock Shield for Arduino NCS314. This is example of assembled board NCS314 - complete Set. The base listing contains only BARE PCB and full set of electronics parts (Tubes, Columns, Arduino and Power Supply not included). If you have ANY questions, PLEASE ASK us.