Fast uploading pf the Firmware via USB to the Control Board. All the latest version of the Firmware to all our Nixie Clocks are always available on our GitHub channel.No need for additional drivers, we are using only genuine USB-to-serial converters (FTDI), drivers for them are pre-installed in all popular OSes: Windows, MacOS, Linux. It is easy to modify the Nixie Clock's Firmware functions for your tasks due to the open Arduino platform. We use High Quality PCBs and Components, also we use Japanese aluminum capacitors only for our Boards (Nichicon, Panasonic). Tubes Board is easy to modify by cutting if you want to build 4 Tubes Clock [HH:MM] from 6 Tubes Clock.
Our Nixie Boards use Power On Self-Test (POST): LED backlight flashing, Tubes flashing and Start up Tune. Our Boards use, Firmware version can be seen at the end of the POST test. Our Tubes Boards use Unique detailed Tube test - our soft test checks each Tubes segment on every Tube so it distinguishable to see segments failures. Clock support many kinds of Nixie tubes (4 tubes [HH:MM] format).
Date format: 4 tubes [DD:MM]; 12/24 hour mode. Slot Machine Anti poisoning - tubes saving function. Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it.
Or you have option for a cyclic full spectrum color change! Switching on/off LED backlight in the matter of seconds. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so you can easily change it (included songs: Mission Impossible, We Wish You.Easy updating firmware via USB using Arduino IDE. Software based on Arduino Sketch, so MCU has Arduino bootloader within.
Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end. Unique detailed tube test - our soft check each segment on every lamp. Distinguishable to see segment failure.
Clock preserve the time while power is off. All settings are stored to non-volatile memory!Integrated High Voltage Power supply 150 - 220V. ICSP connector for flashing Arduino Bootloader to blank MCU. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (please check the manual).
Test points for testing, adjust and control low and high voltage circuits. Pads for internal buttons and terminals for external buttons. Pads for internal USB connector and terminals for external USB.
Terminals for internal and external power connector. Terminals for external and internal buzzer. 2 dots Column (digits separator) with independent controls for upper and lower dots. Power consumption: 11-14V, 360mA (Recommended: 12 VDC, not less than 1A). NCM109 MCU board size: 100 x 50mm W.NCT414 Tubes board size: 200mmx50mm. The MCU board support a variety of tubes, such: ZM1042, Z522M, Z566M, Z5220M, ZM1040, Z5660M, B566M, LC-631; xUSSR's types: IN-14, IN-18, IN-12, IN-8, IN-7, IN-1, IN-2, IN-4, IN-8-2, IN-15, IN-16, IN-17. To use this tubes you need appropriate tubes PCB(s). IN-14 Nixie Clock with Column and Sockets by GRA & AFCH. IN-14 Nixie Tubes Clock without Column without Sockets.
IN-14 Nixie Tubes Clock without Column with Sockets. IN-14 Nixie Tubes Clock with Column without Sockets.
IN-14 Nixie Tubes Clock with Column with Sockets. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios". The seller is "gra_and_afch" and is located in this country: UA.