Nixie Clock IN-18 Arduino Shield NCS318 with Sockets and Columns. The Ardrduino Nixie Tubes Shiled NCS318 allow You to make 6 digits Nixie Tubes Clock in "Divergence Meter" style (by GRA & AFCH). Or You can just display any 6 digits strings on this IN-18 Nixie Tubes made in xUSSR. Hundreds of thousands of Arduino Boards are already fueling people's creativity all over the world, everyday.
PCB design, schematic, housing and software made by GRA & AFCH. Nixie Clock Shield NCS318 compatible with Arduino Uno and Mega. So it allows you to write your own unique programs on the Arduino platform, the latest sources are always available on.
Github at the "NixeTubesShieldNCS318" repository. NCS318 board - 1 pc. Arduino UNO or MEGA - 1 pc (optional).IN-18 Nixie Tubes - 6 pcs (optional). IN-3 Neon lamps - 2 pcs (1 additional spare).
GPS, Temp sensor, Remote - optional. Set of hex spacers and screws. User manual on vintage-style paper. Easy to build beautiful clock - we offer housing. A special socket for each pin IN-18 - Easy to change tubes.Easy to customize firmware under Your own needs, thanks to an open platform - Arduino. The latest version of the firmware always available on GitHub. No need to download drivers - we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux. Very high qualty of Printed Circuit Boards. If you have ANY questions. Shiled support 6 IN-18 Nixie tubes [hh:mm:ss]. Temperature display (DS18B20) [Celsius or Fahrenheit]. GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included).
Operation via IR remote control (Remote control Sony RM-X151, not included). No need refresh or update information on the tubes. The maximum possible brightness of the tubes.
Date format: DD:MM:YY. Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you).Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test. Integrated High Voltage Power supply: 150 - 220V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits. RTC (Real Time Clock) with Backup battery.
3 buttons on board to control. Potenciometer to adjust High Voltage. IR reciver TSOP4836 for IR remote controllers (may conflict with "Tone" library).
8 pcs of RGB SMD LEDs. Places for 2 column with 2 neon dots inside. Separate controls upper and lower dots. Recommended: 12V, 1-2A (center pin positive +).
Nixie Tubes Shiled NCS318 PCB size: 264 mm x 90 mm x 53 mm. Nixie Tubes Clock Arduino Shiled NCS318 - gallery.If you have ANY questions, PLEASE ASK us. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios". The seller is "gra_and_afch_2" and is located in this country: UA. This item can be shipped worldwide.